Dust Hood for SILA 700A3
We are now launching a new accessory-
Sila Dust Hood - which has several clever functions: Dust cover, Transport protection and as Decontamination frame
Just open the Dust Hood’s hatches to quickly and easily create a mixing station for fixing and joining. When you place a bucket by the Dust Hood, the dust is directed into the Air cleaner and thus prevents the dust from spreading. When you are done, you can quickly fold the hatches in again. In this closed position the cover functions as transport protection. Not only that: Because the cover is based on our patented Decontamination frame, you can also use the Dust Hood to build up a negative pressure zone. So we have 3 functions in 1 product.
1. Mount the Dust Hood on Sila 700A3
The frame is equipped with 8 magnets that hold the Dust Hood in place. Make sure the "studs" end up correctly placed. (see picture)
2. Open up hatch 3
(with the help of the nylon band in slot 5) until the hook gets stuck in the notch. (Picture hook in notch).
3. Open up hatch 2
and at the same time fold down angle flap number 5. Make sure that the angle flap hooks into the notch in hatch 2.
4. Open up hatch 1
and at the same time fold down angle flap number 4. Make sure that the angle flap hooks into the notch in hatch 1.
Sila Dust Hood is available for SILA 700A3 & SILA 600A3
|130106||Dust Hood Sila 700A3|
- Technical data and documents